HP

Service Pack for ProLiant (SPP) Version 2017.07.1

همانطور که در این مطلب عنوان شد ، شرکت HP مدت زمانی است مجموعه نرم افزاری را برای بروز رسانی Firmware های  سرور های تولید شده خود تحت عنوان  (Service Pack for ProLiant (SPP در اختیار کارشناس فنی و نماینگی های خود در سراسر دنیا قرار می دهد . طی این چند سال شرکت HP همیشه در ماه آوریل و سپتامبر اقدام به انتشار این بسته بروز رسانی میکند ,ولی اینبار با کمی تغییر دوماه زودتر این محصول را در جولای ارائه داد که این تقدم بی ارتباط با به بازار آمدن سرور های نسل G10 نیست . ما در NewAdmin هم با فاصله اندکی پس از تست و اطمینان از سلامت بسته در این پست قصد داریم ضمن معرفی این بسته نرم افزاری ارزشمند به بحث در مورد ویژگی های این نسخه و نحوه استفاده آن بپردازیم .

یکی از نکات قابل توجه در این نسخه پشتیبانی از سخت افزار نسل جدید Hp یا همان سری G10 است .همچنین موارد خاصی از که در نسل G8 وجود نداشت نیز اضافه شده است

این بسته نرم افزاری که به صورت یه فایل ISO در اختیار شما قرار گرفته است . می تواند به عنوان یک Bootable DVD بر روی یک سرور مورد استفاده قرار گیرد ضمن اینکه امکان اجرای نسخه تحت ویندوز آن برروی سیستم عامل نصب شده بر تجهیزات سروری HP را نیز دارد.شما به کمک این Service Pack می توانید جدای از بروز رسانی Firmware سخت افزار اصلی سرور،Firmware  تمامی تجهیزات تولیدی شرکت HP اعم از انواع کنترلر و HBA های و .. تولیدی این شرکت را نیز بروز کنید .

Service Pack for ProLiant (SPP) Version 2017.07.1

 


Installation Important Notes: 

In order to reduce the frequency at which servers need to be updated, HPE has changed the packaging and delivery of the SPP. There are now two types of SPPs:

A single “Production SPP” that contains the firmware and drivers for the all of the production server generations, and
Multiple server generation-specific “Post-Production SPPs” that contain the firmware and drivers for a specific post-production server generation (e.g. Gen8 only Post-Production SPP that contains the firmware and drivers for all of Gen8 server models).
The 2017.07.0 SPP is a production SPP and contains components for the Gen9 and Gen10 server platforms.  Components for the G7 and Gen8 server platforms are available in the Post-Production SPPs. For additional information, please refer to Reducing Server Updates.  Post-Production SPPs can be downloaded from www.hpe.com/servers/SPP/download.

Reboot Requirement:

Reboot may be required after installation for updates to take effect and hardware stability to be maintained.

Install Instruction:

Installation instructions

There are two methods for using the Service Pack for ProLiant to update your ProLiant servers:

–    Online mode – Runs on a Windows or Linux hosted operating system
–    Offline mode – Server is booted to the ISO

Automatic mode – Firmware components will be updated without interaction
Interactive mode – Follow the onscreen steps to update firmware components

 To initiate deployment in Interactive mode:

Run the launch_hpsum.bat (Windows) or launch_hpsum.sh (Linux) script, which is found in the root of the ISO.

Automatic mode will by default run firmware update without any user interaction after sitting 30 seconds at the menu screen when an SPP ISO image is used to boot the server.

Booting the SPP from iLO virtual media is only supported in Automatic Firmware Update mode. Users attempting this in any other mode may experience hangs from connection timeouts, difficulties updating iLO firmware, and mouse syncing issues.
End User License Agreements (EULA) are available in the EULA folder for viewing.

Note: After installing Microsoft Windows operating system Service Pack or other operating system updates, HPE recommends reinstalling the software from the SPP.

Click here for the Service Pack for ProLiant Release Notes

درباره نویسنده

newadmin

پاسخ دهید